Anycubic photon s review. NEW ANYCUBIC PHOTON S BAD REVIEW : AnycubicPhoton

Anycubic Photon review: An amazing (and affordable) resin 3D printer

anycubic photon s review

Once complete the resin tank is reinserted and we're ready to start. Ultimately, this is a simple but great update that proves Anycubic listens to their customers. The screen on the Photon displays basic data when your model is being constructed. As long as the screen displays a complete rectangle, the unit is good to go. I usually cure stuff for about 10 minutes or so, and only then remove the supports, which are pretty brittle by this point and usually break away easily. Auto-leveling has also been reduced to a single-screw operation that has most users up and running in under 30 minutes.

Nächster

Anycubic Photon Zero 3D printer review: This is the place to start resin printing

anycubic photon s review

There is an L-shaped door like the original Photon that opens upwards and is connected to the backside via a hinge. Once you free the model from the platform it needs to be rinsed or soaked in isopropyl alcohol to remove any uncured resin. With the Photon you get nice, sturdy construction and reliable components. I had knockoff MicroMake D1 for about a year and a half until I upgraded to the Photon. The fumes from the resin are pretty strong as well, so make sure you are working in a very well ventilated area. Overall, the Photon S is an upgrade to the original Photon. Following on from this I also grabbed a full litre of Anycubic Grey resin.

Nächster

Anycubic Photon Review

anycubic photon s review

Getting the 3D file ready for printing was a bit trickier. On one edge of the bath is an indent to enable easy pouring of the resin through filters once each model has been completed. If you want to dive deeper, you will end up scratching your head while trying to create custom slicer settings. After a primer coat, the surface details are all gone. If you need more speed, Anycubic Photon S is much better than Anycubic Photon.

Nächster

Anycubic Photon vs Anycubic Photon S Review

anycubic photon s review

If that's the case, a small build plate won't be a deterrence. Overall, Anycubic Photon S is a successful upgrade from its predecessor. They fit good, are pretty robust and yet let you feel everything through your fingertips. The Photon did about average, earning a 5 out of 10. Yes, that flimsy door needs to be fixed.

Nächster

Anycubic Photon

anycubic photon s review

With a heavy coat of paint, I could possibly get away with this, but if I were to drybrush or wash them as I would want to it would pick up every single ridge, accenting the issue. While leveling the print platform, you need to put a piece of paper below it and lower it down until you feel the resistance while pulling the paper. The model adheres to a platform that is lowered into the resin and as the printer operates it appears as though the model is being pulled up from inside the resin vat. There might be a little bit of a smell as the filament softens, but its still a process you can safely carry out in a study, workshop or spare bedroom. It's like the models are injection molded, it is that good. If you have any Digital 3D Modelling skills or even just an interest in 3D Modelling, the world is your oyster.

Nächster

Anycubic Photon S Review for Miniatures

anycubic photon s review

Both components are held in place by thumbscrews and require the build platform to be raised. Whereas on the right body the wings and skull are nicely pronounced. Of course, the time depends on how complex and big the model is. Finally after several hours, depending on the complexity of the model, your 3D print is done. I did not hollow that one in particular, but have hollowed others.

Nächster