Logitech z2300. support.booktrack.com

Logitech Z2300 vs Klipsch ProMedia 2.1. Which is the Best?

logitech z2300

Such tolerance errors are common amongst dual-ganged pots. I have attempted to reconnect it back up as per where it connects and seems to align with schematic. The first time I did my research, I found a guy who reverse engineered the thing. This set blew the doors off anything I've ever experienced before. The up-sized drivers in the speakers make for a pretty average mid-range.

Nächster

Logitech Z2300 vs Klipsch ProMedia 2.1. Which is the Best?

logitech z2300

He can buy himself another set. Even in the open space it sounds great. Also you will need a steady hand to solder the wires directly to the 15 pins on the main pcb. Eventually the whole thing launched like a rocket. Teardown - Look inside Logitech Z-2300 2. Very responsive lows, very clean highs.

Nächster

Logitech Z 2300 Control for sale

logitech z2300

Schematics found So eventually I did another round of research, and found this technical guy that took apart the control pod as well and reverse engineered it. Only thing is that I get some static when appliances are turned on and off, haven't quite figured out if it's actually the product's fault. This is a headache at best and the more I read it, the more confused I become, when looking at the board references and then trying to makes sense of it from there. Sub is possibly too big, but placed on the floor somewhere you won't notice. I am a musician, gamer, nerd, bum, audiophile.

Nächster

BLOWING The Logitech Z

logitech z2300

You could buy another set just to replace the pod; in my case this was cheaper than buying the ebay control pod on ebay. Not only is it a computer speaker. Not professional stuff, but enough to get me started. I followed the schematic just as it says I am a computerengineer and very used to soldering but just do not understand audio. As an engineer, I wholeheartedly respect that.

Nächster

Logitech Z2300 vs Klipsch ProMedia 2.1. Which is the Best?

logitech z2300

I have cranked this up a few times and never ever heard any distortion from the set itself only distortion came from nearby objects or furniture that wasn't tied down securely. This particular set of speakers is a set for those who love to crank up some music or play games with loud music on their computer. The guy in Harvey Norman recommended them and I wasn't sure that should believe him but. I worn out three control pods now. I even bought a whole speaker set just for the control pod, because it was cheaper than buying the replacement pod as advertised on eBay. Best value for a quality sound.

Nächster

Logitech Z

logitech z2300

I drilled 2 holes for the pots, wired them directly to the corresponding pins on the 15 pin conn. Read more I find when connecting this 2. Over time the core of the cable breaks therefore causing signal loss. This speakers Logitech Z-2300 also know as The Last of the Titans. I was fortunate enough to find this thread and got it to work but i have a slight issue.

Nächster

BLOWING The Logitech Z

logitech z2300

So this is what I did, I bought a complete set, just to replace the control pod. Even at full volume there is no distortion at all except for the neighbors complaining. I cut the legs of the potentiometer as high as possible, so that I had enough left on the board to get them with my pliers. I was surprised at the sound quality. The Polished aluminium tips on the 3.

Nächster

Logitech Z

logitech z2300

This control connects the system to the audio source and provides users with the knobs, buttons, and indicators needed to operate the unit. Also sometimes one channel failed; I would only hear the left or the right speaker. The speakers where fine, so it would be such a waste to replace the whole set, just because the volume knob gave up. Tried everything and still nothing, so i said what the hell, if its broken i cant break it more so i opened the control pod myself. Now it was quite easy to de-solder them, because I could pull the remaining legs out one by one while heating it with my soldering iron. I have had my Z-2300's for just ov.

Nächster